Now click on scale drop down menu next to add scales button and select scale 1”=1’ from the drop down menu, repeat the process for 1/8”=1’ and ½”=1’ scales also. Now give your dimension style a name, I am naming it as “My Anno Dim” and check the annotative radio button then click on continue. A new dimension style manager window will pop up, click on the new button on right side of this window. To make annotative dimension style type DIMSTYLE on the command line and press enter. So we can assign the annotative property to dimension and text and keep its size fixed in different scales throughout the drawing.įigure 3 is again plotted at the scale of 1”=1’ but with annotative property assigned to the dimension text in which size of dimension text is equal to its size in A3 sheet (figure 1) where the scale was ¼”=1’ making it look more consistent. Obviously, we don’t need large text we want uniform text and dimension size throughout different scales of the drawing. Now obviously with a change of scale of viewport the scale of dimension text also changed in same proportion which you can see in the drawing but do we really need large dimension text as seen in figure 2? Now here is another drawing in which only the kitchen is included at a zoomed scale of 1” = 1’ Here all dimensions, text and blocks are clearly visible with respect to the viewport. Now with this scale, the drawing looks like this on A3 paper. Let’s select a scale of ¼” = 1’ which in layman’s term can be summed up as 0.25 inches on paper equals 1 feet on actual drawing. Now in order to plot this drawing on a normal A3 size sheet of paper which is 420 X 297 mm we need to decrease the overall scale of drawing to appropriate size. Let’s assume that we have a floor plan with maximum exterior dimensions of 525 inches and 336 inches. The annotative property took this trouble out of drawing process. This process results in an unnecessary amount of data in drawing leading to confusion and larger file size and it’s needless to say that it also causes wastage of drafting time. One had to make multiple copies of the same object for different scales and the objects were then put on different layers and for each viewport or scale of drawing only appropriate layer was turned on keeping rest of the layers off. Prior to the induction of the annotation scale of AutoCAD, the task of plotting objects with the correct scale for different viewports was a tedious job. Following is the result of choosing a rotation of 15 degrees:įor more information on AutoCAD please visit our webpage or contact us using the form below.Īlternatively, explore our full range of AutoCAD training courses.The annotative property was added in the AutoCAD 2008 version and it is a useful tool for keeping annotation size constant in AutoCAD. You can indicate the angle by clicking on two points or directly typing the numeric value. Instead of choosing the ‘Most Readable’ option, we could have made all texts to be oriented with a certain angle. If you press ENTER again, the texts will be reoriented so they can be read from left to right or from bottom to top: Select all of the text whose orientation you wish to change and press ENTER. Alternatively, you can type TORIENT in the command line: Go to the Express Tools tab of the Ribbon and, within the Text Panel, expand Modify Text and click on Rotate. In order to fix that, we can go through the following steps. Some of the texts are upside down and difficult to read. The command works with text, mtext, attribute definitions and blocks with attributes.Ĭonsider the following example which contains eight texts with different orientations: This command is located in the Express Tools, so you will need the full version of AutoCAD to access it.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |